Gas Chromatography

Looking for more information on carbon adsorbents for gas chromatography (GC) and sample preparation? If so, read on...

Electronic cigarettes, or “e-cigarettes,” are a relatively new product that is experiencing a rapid growth in popularity. As a result, users, regulatory agents, and scientists are interested in assessing the safety or potential risks associated...

In this article we continue our liner discussion with a focus on liner volume. One of the most important liner design variables is the internal volume. Larger internal volumes are preferred for general use because they minimize the chance of vapor...

Here we continue the discussion of inlet liners with a focus on liner outer diameter. It is important to realize that correct liner choice is most critical for:

Selecting an appropriate inlet liner from the myriad available liner choices is a daunting task, especially when there is little qualified technical information about what differentiates them in terms of actual performance. Here we start...

Although gas chromatography has many positive attributes as an analytical tool, its incompatibility with labile and active compounds is certainly one of its biggest weaknesses. Here we discuss evidence of sample decomposition and what we might do...

Continuing our saga of split sample introduction, here we discuss measuring gas flows and liner selection for split injections.

Anyone who analyses samples by capillary gas chromatography has most likely used a split inlet. Although simple in concept, there are a few things to keep in mind to get the best analytical results possible.

I recently received a question relating to the saturation of GC detectors. The GC user was unsure of the causes of saturation, what effect saturation might have on analytical results, how to know when it is happening, and how to avoid it.

There has been a recent surge in discussions amongst gas chromatographers about switching from helium to hydrogen for carrier gas. Most GC manufacturers, column suppliers, and suppliers of bottled gases and/or gas generators have been feeding the...

We previously talked about determining limit of detection (LOD) and limit of quantitation (LOQ). I mentioned that it is important to pay attention to the detector acquisition rate and amplifier settings (if they are adjustable) since these can...

I received this question from Ask the Doctor . “I am doing some research trying to quantify an illicit drug using external calibration and I was wondering if you could help me understand the best way I can obtain my limit of detection and...