This study focused on method performance of ion chromatography (IC) with post column derivatization and absorbance detection for determining iron (III), copper (II), nickel (II), and zinc (II) in surrogate nuclear power plant (NPP) waters.
This application note introduces a method for a faster and more efficient separation of trace concentrations of ionic impurities found in power plant waters using an automated reagent-free ion chromatography system.
This ion chromatography column selection guide enables you to select the best IC column for your application and provides recommendations for each column with a list of suitable applications.
Trace analysis of cations, amines, and transition metals by ion chromatography can be carried out with or without ion suppression. However, some applications require particularly a highly sensitive analysis. Read this article from Issue 9 of the ...
This application brief outlines how the integrated Thermo Scientific Dionex Easion IC system coupled with the Dionex AS-DV autosampler provides a simple and low-cost instrument setup for routine determination of inorganic anions in drinking water.
This application brief outlines the determination of cations and ammonium in environmental waters using a Thermo Scientific Dionex IonPac CS16 column on a Dionex Easion IC system in DCR mode.
Read how the City of Atlanta Department of Watershed Management found automated methods using a Thermo Scientific Gallery Plus discrete analyzer to reliably test and supply safe drinking water.
For laboratories that perform routine process water, drinking water and wastewater analysis, Thermo Scientific™ Gallery™ discrete analyzer systems provide increased throughput while lowering the cost per sample for environmental analysis. This...
Read how the Erie County Public Health Laboratory addressed the challenges associated with quantitation of target disinfection by-products DBPs in drinking water per U.S. EPA Method 557 by adopting IC-MS/MS.
This study demonstrated the determination of trace borate in high-purity waters using ion-exclusion chromatography and suppressed conductivity detection. This method offers an integrated solution of trace level boron as borate.
This application note demonstrates an automated method to determine a range of perfluorinated alkyl substances (PFAS) by combustion IC within environmentally relevant matrices and compare results with existing highly specific methods based on...
Posts by Topic
- Environmental Water (70)
- Methods & Applications (55)
- Environmental Atmospheric (41)
- Environmental (40)
- PFAS (39)
- Webinars & eSeminars (36)
- Environmental Pesticide Analysis (17)
- Food Safety (13)
- GC-MS (13)
- Gas Chromatography (GC) (13)
- LC-MS/MS (13)
- Environmental Ground (12)
- Ion Chromatography (11)
- Food Contaminants (10)
- Analytix Reporter (7)
- ICP-MS (7)
- Videos & Tutorials (7)
- Mass Spectrometry (MS) (6)
- eBook (6)
- Environmental Industrial & Process (5)
- Environmental Materials Emissions (5)
- LC-MS (5)
- Solid Phase Extraction (SPE) (5)
- TD-GC-MS (5)
- Two-dimensional Gas Chromatography (GCxGC) (5)
- Spectroscopy ICP (4)
- Spectroscopy UV VIS (4)
- VOCs (4)
- GC×GC-ToF-MS (3)
- Ion Chromatography (IC / IC-MS) (3)
- QuEChERS (3)
- Spectroscopy Atomic (3)
- Spectroscopy IR NIR (3)
- Spectroscopy Raman (3)
- Thermal desorption (3)
- trace analysis (3)
- Emerging Contaminants (2)
- GC-MS/MS (2)
- GC-TOFMS (2)
- GCxGC (2)
- ICP-OES (2)
- Microplastics (2)
- Nuclear Power Plants (2)
- PAH (2)
- Petrochemicals (2)
- Sample Preparation (2)
- Supercritical Fluid Chromatography (SFC) (2)
- elemental analysis (2)
- energy (2)
- Chromatography Software (1)
- Cosmetics (1)
- FT-IR (1)
- Food Flavours & Fragrances (1)
- Food Quality (1)
- GC-ICP-MS (1)
- GPC/SEC (1)
- HPLC (1)
- Karl Fischer Titration (1)
- Learning & Training (1)
- POPs (1)
- Petrochemical (1)
- Pharma Quality Assurance (1)
- Plastics (1)
- Polymer Analysis (1)
- Sampling (1)
- Spectroscopy MIR (1)
- biofuels (1)
- high throughput (1)
- hydrogen (1)
- intelligent software (1)