Environmental Analysis

Improved Analysis of Dioxin Compounds in Water by Isotope Dilution GC/MS/MS

Are you looking for an alternative, effective GC/MS/MS method for dioxin analysis in water? Would you like to reduce time-consuming sample preparation without highly sensitive and selective instrumentation? If so, Separation Science in...

Per- and Polyfluoroalkyl Substances in Drinking Water Using Solid-Phase Extraction and LC-MS/MS

UCT has produced an application note outlining a simple solid-phase extraction procedure for the extraction of 26 diverse per- and polyfluoroalkyl substances (PFASs) in drinking water using UCT’s polymeric weak-anion exchange SPE cartridges...

Lowering costs in your environmental lab...

Environmental laboratories are always looking for ways to save costs without compromising analytical results in terms of sensitivity, robustness or quality controls.

Increase Your Confidence in the Analysis of Environmental Samples with Tandem MS

In this presentation from an 'Advances in Environmental Analysis eSeminar' hosted by Separation Science in collaboration with Bruker, Ed George provides some tips on how to raise confidence in the analysis of environmental samples with tandem...

Fast, Accurate and Sensitive Detection of Trace Organics in Water – Learn more

Discover a fast and robust method for trace level detection of trace organic contaminants using the latest advances in triple quadrupole LC/MS technology.

Do you need a fast and robust method to achieve sensitive detection of organic contaminants...

New Chromatography Columns and Kit Offer Advanced Separations for Environmental and Industrial Markets

Thermo Scientific ion chromatography columns and gas chromatography kit support application flexibility.

Effective Method for Concentrating Semi-volatile Compounds from EPA Method 625

Biotage has produced an application note in which fifty semi-volatile compounds were concentrated using the new TurboVap® II evaporator according to the EPA Method 625. For each of them, six replicates were done to assess the analyte recovery and...

EPA Method 522: Determination of 1,4-Dioxane in Drinking Water by SPE and GC/MS with Selected Ion Monitoring

UCT has produced an application note describing an SPE approach coupled with GC/MS for the determination of the hazardous analyte, 1,4-dioxane in drinking water.

How photometric methods can improve your silicate analysis in water

Separation Science, in collaboration with Merck KGaA, has developed a webinar that will discuss an improved method for analysis of silicate in boiler and process water using an ultrasensitive photometric technique. This technique will be...

Rapid Screening Method for MTBE and BTEX Compounds in Contaminated Ground Water by Portable SPME-GC/MS

PerkinElmer has produced an application note describing a rapid screening method for methyl-tert-butyl ether (MTBE) and the combination of benzene, toluene, ethylbenzene, and xylenes (BTEX) in petroleum contaminated ground water using solid phase...

Optimizing Extraction of Multianalyte Suites from Water Samples Using SPE

Biotage has produced an application note demonstrating an innovative SPE technique that is used in applications where multiple suites of analytes with a broad polarity range are to be extracted simultaneously from a single water sample, such as...

Efficient Extraction of Polyfluorinated Compounds in Water Using SPE

Biotage has produced an application note describing an effective method for the extraction of polyfluorinated compounds in water using EVOLUTE® EXPRESS WAX SPE prior to LC-MS/MS analysis.

    

Subscribe to FREE learning from the experts!