Environmental Analysis

Solid-phase extraction of PAHs in water by EPA method 8310

UCT has produced an application note outlining a solid-phase extraction (SPE) procedure using C18 SPE universal cartridges to extract 16 PAHs in water by EPA method 8310. This is a performance-based method allowing for modifications with the QC...

GC-MS Technology to Improve Analytical Efficiency and Reduce Cost of Operation for VOC and SVOC Compound Analysis

Separation Science, in collaboration with its sponsors Agilent, Markes International and PerkinElmer, has developed an 'Advances in Environmental Analysis eSeminar'. This unique on-demand event brings together some of the leading exponents in the...

TUTORIAL SERIES: Environmental Applications of Ion Chromatography

Want to know more about ion chromatography (IC) applications? How can correct use of this technique help you develop better environmental, food and beverage methods? Visit the 'Ion Chromatography' learning hub for the latest comprehensive...

Perform online SPE analysis of PPCPs in water

This study outlines the analysis of pharmaceuticals and personal care products (PPCPs) in environmental and drinking water using direct injection LC/MS and online SPE. 

Analysis of PFAS in the Environment

Around the world, communities are discovering that per- and polyfluoroalkyl substances (PFAS) are commonly found in drinking water and the environment. These chemicals are persistent, toxic and harmful and their presence and accumulation in the...

High-sensitivity method for the analysis of nonylphenol in river water using GC-MS/MS

In this application note, a method using a high selectivity triple quadrupole gas chromatography-mass spectrometer (GC–MS/MS) to detect for nonylphenol in river water is presented.

Highly sensitive MRM-based method for detection and quantitation of seven pharmaceuticals and PPCPs in surface water

Shimadzu has produced an application note describing a high sensitivity detection method for the detection of Pharmaceuticals and Personal Care Products (PPCPs) in surface water that does not require pre-treatment and concentration of water...

Highly sensitive LC/MS/MS method for direct quantitation of artificial sweeteners in surface water

Shimadzu has produced an application note describing an LC/MS/MS method for direct quantitation of artificial sweeteners in surface and drinking water.

Quantitative determination of phenols in surface water on LC/MS/MS with APCI interface

Shimadzu has produced an application note describing an MRM-based method for detection and quantitation of phenol and nine substituted phenols in reservoir water, without pre-treatment and pre-concentration.

Improved Analysis of Dioxin Compounds in Water by Isotope Dilution GC/MS/MS

Are you looking for an alternative, effective GC/MS/MS method for dioxin analysis in water? Would you like to reduce time-consuming sample preparation without highly sensitive and selective instrumentation? If so, Separation Science in...

Per- and Polyfluoroalkyl Substances in Drinking Water Using Solid-Phase Extraction and LC-MS/MS

UCT has produced an application note outlining a simple solid-phase extraction procedure for the extraction of 26 diverse per- and polyfluoroalkyl substances (PFASs) in drinking water using UCT’s polymeric weak-anion exchange SPE cartridges...

Lowering costs in your environmental lab...

Environmental laboratories are always looking for ways to save costs without compromising analytical results in terms of sensitivity, robustness or quality controls.

    

Subscribe to FREE learning from the experts!